Adaptec 2940UW PRO, User Manual, Page: 21 / 38

11
Using the SCSI Card 2940UW Pro and SCSI Devices
Connecting the LED Connector
( Optional feature ) Most computers have an LED disk activity light on
the front panel. You may choose to disconnect the cable from the
LED connector on the motherboard and connect it to the LED
connector on the SCSI card. The LED on the front panel of the
computer will light whenever there is activity on the SCSI bus (see
Figure 1).
Note:
If you are using non-SCSI disk drives (for example,
IDE), you may not want to connect your computer’s LED to
the SCSI card, since the LED will no longer indicate non-
SCSI disk activity.
Figure 1. Connecting the LED Cable to the LED Connector
2-pin LED
LED Cable
from Motherboard
Cable
LED Connector
on Host Adapter
pin 1
pin 1