Adaptec 2230SLP - SCSI RAID Controller User Manual Download Page 5

4

Confidentiality. You agree to maintain the Software in confidence and that you 
will not disclose the Software to any third party without the express written 
consent of Adaptec. You further agree to take all reasonable precautions to 
preclude access of unauthorized persons to the Software.

Term. This license is effective until January 1, 2045, unless terminated earlier. You 
may terminate the license at any time by destroying the Software (including the 
related documentation) together with all copies or modifications in any form. 
Adaptec will have the right to terminate our license immediately if you fail to 
comply with any term or condition of this Agreement. Upon any termination, 
including termination by you, you must destroy the Software (including the 
related documentation), together with all copies or modifications in any form.

Special Terms Applicable to Databases. Where a database is included with the 
Software, you acknowledge that it is licensed only in connection with the use of the 
Software to perform disc creation, and that the database and all data derived 
therefrom must be maintained in confidence in accordance with the provisions of 
Section 4. This license does not grant you any rights to distribute or disclose such 
database or data.

Limited Warranty. Adaptec and its Licensor warrant only that the media upon 
which the Software is furnished will be free from defects in material or 
workmanship under normal use and service for a period of thirty (30) days from 
the date of delivery to you. ADAPTEC AND ITS LICENSORS DO NOT AND 
CANNOT WARRANT THE PERFORMANCE OR RESULTS YOU MAY OBTAIN 
BY USING THE SOFTWARE OR DOCUMENTATION. THE FOREGOING 
STATES THE SOLE AND EXCLUSIVE REMEDIES ADAPTEC AND ITS 
LICENSORS WILL PROVIDE FOR BREACH OF WARRANTY. EXCEPT FOR 
THE FOREGOING LIMITED WARRANTY, ADAPTEC AND ITS LICENSORS 
MAKE NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT 
LIMITED, AS TO NON-INFRINGEMENT OF THIRD PARTY RIGHTS, 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some 
states do not allow the exclusion of implied warranties or limitations on how long 
an implied warranty may last, so the above limitations may not apply to you. This 
warranty gives you specific legal rights and you may also have other rights which 
vary from state to state.

The entire liability of Adaptec and its licensors, and your exclusive remedy for a 
breach of this warranty, shall be: 

The replacement of any media not meeting the above limited warranty which is 
returned to Adaptec; or:

if Adaptec or its distributor is unable to deliver replacement media which is free 
from defects in materials or workmanship, you may terminate this Agreement by 
returning the Software and your money will be refunded.

Limitation of Liability. IN NO EVENT WILL ADAPTEC OR ITS LICENSORS BE 
LIABLE TO YOU FOR ANY INCIDENTAL, CONSEQUENTIAL OR INDIRECT 
DAMAGES, INCLUDING ANY LOST PROFITS, LOST SAVINGS, OR LOSS OF 
DATA, EVEN IF ADAPTEC OR A LICENSOR HAS BEEN ADVISED OF THE 
POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER 
PARTY. Some states do not allow the exclusion or limitation of special, incidental, 
or consequential damages, so the above limitation or exclusion may not apply to 
you.

Summary of Contents for 2230SLP - SCSI RAID Controller







































Reviews: