Adaptec 2230SLP - SCSI RAID Controller, User Manual, Page: 19 / 38

Using the Command Line Utility
●
18
Command
arcconf getversion
What it does
Lists version information for all controllers or a specific controller’s
software components, including information about the BIOS, driver,
firmware currently running, and firmware that will run after a reboot.
Note: The firmware version that will run after a reboot is called the
“staged” firmware.
Syntax
arcconf getversion (use this for information on
all controllers)
arcconf getversion <Controller#> (use this for
information on a specific controller)
Parameters
<Controller#>
Example
arcconf getversion
Return values
controllers found: 0
FAILURE: 0x01 bad arguments or internal error
Command
arcconf rescan
What it does
Enables the controller to check for the removal of any disk drives in the
ready state and to check for the connection of any new disk drives to the
controller. The command returns when the rescan is complete.
Syntax
arcconf rescan <Controller#>