1.
Place the POWER-PULL unit behind the third row bench. Run the cable housing and the pulley
assembly between the base of the rear panel and the seat. The cable must run with a nice 90 degree
bend. Make sure to eliminate any twists in the cable as they will cause friction and reduce the
power of the cable recoil spring and by extension, reduce the life of the cable. The POWER-PULL box
can be fastened with self-taping screws or bolts through the two plates that protrude from either
side of the box.
NOTE:
The POWER-PULL box can also be installed in the rear of the vehicle with the
cable coming in a straight line from behind the seat.
