Revolution T
impani Manual
www
.adams-music.com
22
23
Axel pin in struts
Fine tuner mechanism (if applicable)
Pedal Axel
Spider
Pedal Connection Rod
Tuning Gauge Connection Rod
Spring Tension Mechanism
The spring mechanism has been lubricated at the factory with a long lasting,
high performance grease.
Disassembly will only cause problems that are not easily solved.
DO NOT DISASSEMBLE THE SPRING TENSION MECHANISM.
3
Tensioning mechanism: Use aerosolized lithium grease (not oil, WD40, or similar products) to direct lubrication into the following places as necessary. Always use a
cloth to protect the instrument from overspray.
2
Tension rods
Remove old grease with mild
cleaning agent on a soft cloth or #00
steel wool.
Replace tension rod washer if
necessary. (Washer part number
PB418, quantity 1 each)
Remove cleaning agent with a
slightly wet soft cloth.
Apply small amount of multi-
purpose lithium grease to tip of
tension rod.
4
Tuning gauge mechanism: Use aerosolized lithium grease (not oil, WD40, or
similar products) to direct lubrication into the following places as necessary.
Always use a cloth to protect the instrument from overspray.
Linkage Joint
Indicator Axel
5
Replace head centering insulation as necessary.
The foam insulation pieces
center the head in the counterhoop, making it easier to have an even collar.
Insulation for 20/23/26: PT012 (Each part number is 1 piece of foam)
Insulation for 29/32: PT013
