background image

2

QUICK START GUIDE [ENGLISH]

Please read the following safety instructions before setting up your 
system. Keep the instructions for further reference. Please heed the 
warnings and follow the instructions.

Caution: To reduce the risk of electric shock, do not open the 
loudspeaker. There are no user-serviceable parts inside. Refer 
servicing to qualified service personnel.

This product, as well as all attached extension cords, must be 
terminated with an earth ground three-conductor AC mains  
power cord like the one supplied with the product. To prevent 
shock hazard, all three components must always be used.

Never replace any fuse with a value or type other than those  
specified. Never bypass any fuse.

Ensure that the specified voltage matches the voltage of the power 
supply you use. If this is not the case do not connect the  
loudspeakers to a power source! Please contact your local dealer 
or national distributor.

Always switch off your entire system before connecting or  
disconnecting any cables, or when cleaning any components.

To completely disconnect from AC mains, unplug the power  
supply from the power socket. The monitor should be installed 
near the mains connection and it should be easy to access the 
socket and disconnect the device if necessary.

Protect the power cord from being walked on or pinched  
particularly at plugs, sockets, and the point where it exits  
from the apparatus.

1. IMPORTANT SAFETY INSTRUCTIONS

Caution

Risk of electrical shock

Do not open

Risque de shock electrique

Ne pas ouvrier

CAUTION: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT REMOVE BACK COVER OR ANY OTHER PART.

NO USER-SERVICABLE PARTS INSIDE.

DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

REFER SERVICING TO QUALIFIED PERSONNEL.

Summary of Contents for S2V









Reviews: