©
Adam Equipment Company 2020
4.0 SET UP
4.1 ASSEMBLING OF SCALE
Put the scale on a stable and even table.
Adjust the height of the feet to level the scale; the spirit level bubble should be
in the centre of the spirit level.
Put the pan support in place, inserting the pan support pins into the holes on top
of the scale. Place the stainless steel pan on the support.
Avoid excess force to weighing pan or the load cell could be damaged.
5.0 WEIGHING
5.1 BEFORE WEIGHING
Check the setting of the auto shut off function, see section 6.2. If the auto shut
off function is on, the scale will shut off after a period of time if the scale is not
used and it has a stable reading.
5.2
WEIGHING
Press [On/Off] to turn on the scale. The display will show the software revision
then show the model “CAP XX”. Then it will begin its self-checking test from 0 to
9. When reading is stable, the display will show "
", stable symbol, zero
symbol, and the weighing unit used the last time the scale was used.
Press [UNITS/
→
] to select units from "g" / "kg" / "lb" / "oz"/”lb:oz”. Only the
weighing units enabled will be displayed.
Check if the reading is “
”, if not, press [Zero]. “
” and the zero symbol will
be displayed.
Put the item to be weighed on the pan. When the reading is stable, the gross
weight will be shown.
