Customer telephone helpline: 08448 809301
Helpline email address: [email protected]
CO9039
V3_151110
- 5 -
SAFETY CUT-OUT SYSTEM
PLEASE DO NOT OBSTRUCT THE AIR VENTS OF THE ELECTRIC FIRE
.
This appliance has a ‘self resetting’ safety cut out system. To prevent overheating,
ensure the air inlets and outlets are not obstructed. If the safety cut-out operates,
switch off the electric fire and allow to fully cool down. Remove any obstruction
before re-use.
CAUTIONS
Do’s
•
Always install the fire in accordance with this guide. If in doubt obtain expert
advice.
•
Always make sure the electrical socket is accessible and located adjacent
to, but not above or behind the fire.
•
Always disconnect the fire from the electrical supply before carrying out
cleaning, maintenance or replacing the light bulbs.
•
Always make sure the fire is firmly secured.
•
Always ensure the product is assembled in an area that is free from dust,
grease or liquids.
•
Always ensure that the correct tools are used to mount this fire.
•
Always make sure the fire is firmly secured to the wall when complete
Don’ts
•
Never leave children unsupervised in a room where the fire is ON and
unguarded.
•
Never obstruct or cover the fan outlet or force items into fire openings.
•
Never install or use the fire anywhere where water is in use, i.e. Bathrooms,
Kitchens, Shower Rooms, and Swimming Pool etc.
•
Never use aerosols or steam cleaners on or around the fire.
•
Never route the mains supply cable under carpet etc.
•
Never install the fire close to curtains or combustible materials.
•
Never use the fire to dry clothes etc.
•
Never sit or stand on the fire.
•
Never lean or put weight on the fire.
•
Do not use outdoors.
•
Do not position furniture, curtains or other combustible material closer than
1 metre from the heater.
•
Do not site the fire on deep pile carpets or rugs.
•
Never cut off the plug and hard wire into a fixed fused spur
