Customer telephone helpline: 08448 809301
Helpline email address: [email protected]
CO9039
V3_151110
- 2 -
CONTENTS
Fire Identification
1
Introduction
1
Handling
2
Unpacking
2
Parts Supplied
3
Electrical Specification
4
Maintenance
4
Safety Cut-Out System
5
Cautions
5
Installation
6
Fire Preparations (Pebble Glow Fires Only)
7
Operating the Fire
7
Changing the Bulb – Pebble Glow Fire
8
Changing the Bulb – Flame Effect Fire
9
Changing the Bulb – Traditional Fire
10
Plug Replacement
11
Appliance Data
11
Certifications
12
HANDLING
Before continuing any further with the installation of this fire please read the
following:
•
When lifting always keep your back straight. Bend your legs and not your back.
•
Avoid twisting at the waist. It is better to reposition your feet.
•
Avoid upper body / top heavy bending. Always bend from the knees rather than
the waist. Do not lean forward or sideways whilst handling the fire.
•
Always grip with the palm of the hand. Do not use the tips of fingers for support.
•
Always keep the product as close to the body as possible. This will prevent
unnecessary and undue strain on the body.
•
Use gloves to provide additional grip.
•
Always use assistance if required.
UNPACKING THE PRODUCT
The unit is supplied in a single package carton. Carefully unpack the product using
the following procedure:
•
Carefully lift the pieces out of the box
•
Carefully remove the protective wrapping from the pieces
•
Locate the fixing pack and put aside
•
Carefully remove the electric fire from its box and put aside
