- 6 -
Customer telephone helpline: 08448 809301
Helpline email address: [email protected]
CO9073 V3_210711
Use and Care Manual
Eclipse Electric Fire
INSTALLATION of the Eclipse Fire
(into a wooden back panel)
If installing into a stone or laminate back panel, please refer to page 7.
NOTE: Please take care when installing the fire as some edges may be sharp.
4) Offer the fire up to the spacer. Check the
supply cable is not trapped under the fire such
that it may cause it to be damaged.
5) Reattach the fire using the 8 screws,
then refit the TRIM using the opposite
procedure as illustrated in Actions 1 & 2.
6) Place the fret in front of the fire
7) Open the pebble set and place the pebbles
on the fuel bed randomly
2) Unscrew the 8 screws to
detach the spacer
3) Attach the spacer to the
surround using 8 x (3.5 x 12mm)
screws or similar size
1) Unclip the magnetised trim
