Input Channel Configuration Page :
In ADAM-6022 input channel configuration page, user can enable the input channel,
select the input signal type and select the DI status. Channel 0, 1, 2 is the analog input
as the control parameter for PID loop 0 and channel 3, 4, 5 is for PID loop 1 when the
PID loop function is enabled. ADAM-6022 also support MODBUS/RTU protocol,
user can see the detail MODBUS address register number for each channel in this
page. It can be a very important reference for communication work.
ADAM-6022 input channel configuration also support Zero and Span calibration
function. Clicking the “Zero Calib” and “Span Calib” bottom to go to the calibration
dialog block, user can set the initial zero value and span range then click the
“Execute” bottom to proceed the channel calibration work. Please refer the following
pictures for operation guideline.
MODBUS Register
Address
Input Channel Config. Page
Input Signal
Type Select
