background image

ENGLISH (TRANSLATION OF ORIGINAL INSTRUCTIONS)

The pumps described in this manual, once you have unpacked and inserted them in a pumping system, are 

machines that can fill a receiving tank with diesel fuel sucked from a gravity storage tank.

2 - MACHINE SPECIFICATIONS

2.1 - I

ntended

 

use

2.2 - d

escrIptIon

 

of

 

the

 

machIne

The pump is made up of the following parts:

PUMP

 

volumetric self-priming rotary vane electric pump fitted with a bypass valve.

MOTOR

  Single-phase and three-phase asynchronous motor, 2-pole, closed (protection class IP55 in 

compliance  with Standard EN60034-5-86), self-ventilating, directly flanged to the pump body.

FILTER

  stainless steel basket filter, can be inspected.

TABLE OF CONTENTS

1 - GENERAL WARNINGS

2 - MACHINE SPECIFICATIONS

2.1 Intended use

2.2 Description of the machine

2.3 Technical specifications

3 - OPERATING CONDITIONS

3.1 Environmental conditions

3.2 Power supply

3.3 Allowed fluids / Forbidden fluids

4 - TRANSPORT AND HANDLING

4.1 Transport

4.2 Unpacking

4.3 Storage

5 - INSTALLATION

5.1 Preliminary checks and positioning 

the pump

5.2 Hydraulic pipe connection

5.3 Remarks on the suction and discharge 

lines

5.4 Electrical connection of the pump

6 - INTENDED USE

6.1 Preliminary checks and start-up

6.2 Daily use

6.3 Noise level

6.4 Compatibility in an electromagnetic 

environment

7 - TROUBLESHOOTING

8 - MAINTENANCE

9 - DEMOLITION AND DISPOSAL

10 - WARRANTY

11 - TECHNICAL SUPPORT

12 - ATTACHMENTS

12.1 Exploded views and spare parts list

12.2 Wiring diagrams

12.3 Overall dimensions and weights

1 - GENERAL WARNINGS

 IMPORTANT: It is essential to have understood the entire instruction manual before 

performing any operation, so as to safeguard operator safety and to avoid potential product 

damage.

Storing the manual:

This manual must be kept intact and fully legible. The end user and the skilled technicians authorised with 

installation and maintenance of the product in question must be able to consult it at all times.

Reproduction rights:

This manual is the property of ADAM PUMPS S.p.A., which is the sole owner of all rights provided for by 

applicable law, including without limitation copyright rules. All rights under these rules belong to ADAM 

PUMPS S.p.A.: reproduction, even partial, of this manual, its publication, modification, transcription, public 

disclosure, distribution, marketing in any form, translation and/or development, loan, or any other activity 

reserved by law to ADAM PUMPS S.p.A.

Summary of Contents for PA 8050

















Reviews: