© Adam Equipment Company 2014
16
9520revF-Jun14
The screen will show
S 232
or
S USb.
Press the
[Mode]
key
to select which
interface you would like to use. Press
[Tare]
to
confirm setting and configure
interface.
6)
The following options are available for setting the output and accumulation
functions:
Mode
Print Feature
Accumulation
P1 Prt
Data is sent whenever the
[Print]
key is
pressed.
Manual accumulation when
the
[Print]
key is pressed.
P2 Con
Data is sent continuously.
Accumulation is disabled.
P3 AUT
The weighing results will be sent to the
communication port automatically
whenever a stable reading is present.
The balance has to return to zero
before another reading is sent via the
interface.
Automatic accumulation when
stable
Press the
[Mode]
key to change the setting. Press
[Tare]
to confirm and move
to the next parameter.
7)
Setting the baud rate. This is the transmission speed for communication with
printers and computers. The selected rate must match that of the other
device for communications to work.
The following settings are available:
b 600
b 1200
b 2400
b 4800
b 9600
Press the
[Mode]
key to change the setting. Press
[Tare]
to confirm and move
to the next parameter.
8)
Parity settings. Parity is a communications check. There are 3 settings that the
Highland can work with as follows:
Summary of Contents for HIGHLAND HCB1002
Page 2: ... Adam Equipment Company 2014 ENGLISH P1 30 FRANÇAIS P31 59 DEUTSCH P60 90 ESPAÑOL P91 116 ...
Page 89: ... Adam Equipment Company 2014 87 9520revF Jun14 10 0 KALIBRIER ZERTIFIKAT ...
Page 115: ... Adam Equipment Company 2014 113 9520revF Jun14 10 0 CERTIFICADO DE CALIBRACIÓN ...
Page 119: ... Adam Equipment Company 2014 ...
