background image

 

© Adam Equipment Company 2006 

 

24

 
 
 
 

WARRANTY INFORMATION 

 
 

Adam Equipment offers Limited Warranty (Parts and Labour) for the 
components failed due to defects in materials or workmanship.  Warranty 
starts from the date of delivery. 
 
During the warranty period, should any repairs be necessary, the 
purchaser must inform its supplier or Adam Equipment Company. The 
company or its authorised Technician reserves the right to repair or 
replace the components at the purchaser’s site or any of its workshops 
depending on the severity of the problems at no additional cost. 
However, any freight involved in sending the faulty units or parts to the 
service centre should be borne by the purchaser. 
 
The warranty will cease to operate if the equipment is not returned in the 
original packaging and with correct documentation for a claim to be 
processed. All claims are at the sole discretion of Adam Equipment. 
 
This warranty does not cover equipment where defects or poor 
performance is due to misuse, accidental damage, exposure to 
radioactive or corrosive materials, negligence, faulty installation, 
unauthorised modifications or attempted repair or failure to observe the 
requirements and recommendations as given in this User Manual. 
        
Repairs carried out under the warranty does not extend the warranty 
period. Components removed during the warranty repairs become the 
company property. 
        
The statutory right of the purchaser is not affected by this warranty. The 
terms of this warranty is governed by the UK law. For complete details on 
Warranty Information, see the terms and conditions of sale available on 
our web-site. 

 
 
 
 
 

Summary of Contents for CBW 15





























Reviews: