© Adam Equipment Company 2007
10
any time during the counting process by entering the count
displayed and then pressing the
[Smpl]
key. You must be
certain that the quantity displayed matches the quantity on
the scale before pressing the key. The unit weight can be
adjusted based upon a larger sample quantity. This will give
greater accuracy when counting larger sample sizes.
6.3.3 Automatic part weight updates
•
At the time of computing the unit weight (see section 6.3.1A),
the scale will automatically update the unit weight when a
sample less than the sample already on the platform is
added. A beep will be heard when the value is updated. It is
wise to check the quantity is correct when the unit weight
has been updated automatically.
•
This feature is turned off as soon as the number of items
added exceeds the count used as a sample.
6.3.4 Check-counting
•
Check-counting is a procedure to cause an alarm to sound
when the number of items counted on the scale meets or
exceeds a number stored in the memory by using the
[Pst]
key.
•
The stored value is entered from the keyboard. Enter the
numeric value to be stored using the numeric keys. Then
press the
[Pst]
key to store the value.
•
To clear the value from the memory and thereby turn off the
check-counting feature, enter the value "
0
" and press
[Pst].
6.3.5 Manually Accumulated Totals
•
The values (weight and count) shown on the display can be
added to the values in the memory by pressing the
[M+]
key.
The "
Weight
" display will show the total weight, the "
Count
"
display will show the total accumulated count and the "
Unit
Weight
" display shows the number of times, the items have
been added to the memory for accumulation. The values will
be displayed for 2 seconds before returning to normal.
•
The scale must return to zero or a negative number, before
another sample can be added to the memory.
•
More products can then be added and the
[M+]
key to be
