Adam Equipment CBC 15, Service Manual

Page: 9 / 20

@Adam Equipment Company 2005
9
5.2 CBC CALIBRATION (VER. 1.2- 2.02)
The CBC scales calibrate using metric weights and the CBCa scales use either metric or
pound weights, depending on the weighing unit in use before calibration.
The scales will display a value of the weight to be used for calibration. However, you can
enter a different value if desired.
When the parameter menu shows "
" press [Tare] .
The display will show "
" requesting to remove all weights from the platform.
Press the [Tare] key to set the zero point.
It will then show the calibration weight suggested as a whole number, for example:
“ ” “ ” “ ”
Either put this weight on the platform after the stable symbol is on or enter the value desired
and then press [Tare] . The display will show:
" " “ ” “ ”
Place the weight on the platform and press [Tare] again.
At all times the scale should be stable before pressing the [Tare] key to accept a weight. The
stability indicator will turn on to show the value is stable.
CBCa scales will also have the lb or kg indicator on, to show the unit of the weight
requested. If the scale was in pounds before starting the calibration, the weights requested
will be in pound values or if the scale was weighing in kilograms then metric weights will be
requested.
When calibration is done the display will show the counting from 0 to 9 and then return to
normal operation.
If an error message “
” or “ ” is displayed, then re-check the calibration and repeat
it, if necessary.