background image

 

 

© Adam Equipment Company 2007

 

16

 
 
 
 
 
 
 
 
 
 

WARRANTY INFORMATION 

 
 

Adam Equipment offers Limited Warranty (Parts and Labour) for the components 
failed due to defects in materials or workmanship.  Warranty starts from the date 
of delivery. 
 
During the warranty period, should any repairs be necessary, the purchaser must 
inform its supplier or Adam Equipment Company. The company or its authorised 
Technician reserves the right to repair or replace the components at the 
purchaser’s site or any of its workshops depending on the severity of the 
problems at no additional cost. However, any freight involved in sending the 
faulty units or parts to the service centre should be borne by the purchaser. 
 
The warranty will cease to operate if the equipment is not returned in the original 
packaging and with correct documentation for a claim to be processed. All claims 
are at the sole discretion of Adam Equipment. 
 
This warranty does not cover equipment where defects or poor performance is 
due to misuse, accidental damage, exposure to radioactive or corrosive materials, 
negligence, faulty installation, unauthorised modifications or attempted repair or 
failure to observe the requirements and recommendations as given in this User 
Manual. 
        
Repairs carried out under the warranty does not extend the warranty period. 
Components removed during the warranty repairs become the company property. 
        
The statutory right of the purchaser is not affected by this warranty. The terms of 
this warranty is governed by the UK law. For complete details on Warranty 
Information, see the terms and conditions of sale available on our web-site. 

 
 
 
 
 

Summary of Contents for AZplus 15





















Reviews: