Adam Equipment AZextra 15, Service Manual

Page: 13 / 28

© Adam Equipment Company 2007
11
“
P
n
”
When
“
P
n
”
is displayed.
Enter
“
0 0 0 0
” and p
ress [Tare]
“
U
n
LoA
d ”
Empty the pan by removing the load, if there is
any and press [Tare]
“
L
o
A
d ” “
6
” “
K
i
L
o
S
”
Load the requested calibration weight and press
[Tare]
“
SPA
n ” “
PASS
”
If Calibration is complete,
“
SPA
n
PASS
”
will be
displayed. Remove the calibration weight.
Or, “
SPA
n ” “
FA
i
L
”
This means calibration has failed. Remove the
calibration weight and repeat the process.
“
JP O
n
”
Remove the jumper or shorting of the pins
whichever is used. The scale will return to
normal weighing.
6.2 USING “2006” TO ENTER THE SERVICE PARAMETERS
After the jumper has been placed in the position shown, apply power to the scale.
The display will ask for a code number, “
Pn
“ on the Weight window.
Enter the number 2006 when “
Pn
“ is displayed and then press [Tare].
The displays will show the first parameters, called “
F1
” “
CAL
”. To select another parameter
press the [Print] key to advance through the parameters.
Press the [Tare] key to enter a parameter.
To exit a parameter, press the [Zero] key.
The Weight window will show the parameter number and the Unit Price window will show
the word describing the function.
When a parameter is entered by pressing the [Tare] key, the displays will guide you
through the parameter selected and the options available.