© Adam Equipment Company 2019
32
10.2
REAL
TIME
CLOCK
SETUP
The Real Time Clock (RTC) is used only for the RS-232 output. The Date and Time can
be set as required. The scale will keep the clock running even when the power is off.
In weighing mode, Press and hold
[PLU]
key, then press
[CE]
once to enter setting mode.
The display will show
“P1 TrA”
, press
[PRINT]
key once, the display will show
“P2 FUN”
.
Press
[PLU]
key again and again to the unit weight display shows
“F9 FAL”
. At this time,
press and hold the
[PLU]
key, press
[PRINT]
once, then enter into time setting. The
weight window will show
“Date”
, use number keys to input the data information. For
example, 11/10/2013, input
“130111”
. Then press
[PLU]
key to enter time setting. The
weight window shows
“Time”
, use the numeric keys to input the time information. For
example, 10:10, input
“1010”
. Then press
[PLU]
to complete the settings.
Press ‘’ID’’ to escape and return to normal weighing mode.
10.3 AUTO
SLEEP
FUNCTION
To set the auto sleep function you will need to enter the ‘Other function’ parameter setting
in the User parameters (see section 7).
Press the
[PLU]
key and the
[CE/ BACKLIGHT]
key at the same time to enter the
user parameter setting, the display will show the first parameter
”P1 TRA”
Press the
[PRINT/SAVE]
key to move to the other function parameters and press
the numeric button
[2]
on the keypad to access the SL parameter.
Press the
[M+]
key to increase the sleep time in seconds and press the
[Q’TY/PST]
key to confirm.
Press ‘’ID’’ to escape and return to normal weighing mode.
11.0 BATTERY
AND
BACKLIGHT
OPERATION
11.1 BATTERY
The scales can be operated from the battery, if desired. The battery life is up to 90 hours.
When the battery needs charging the battery symbol will appear.
The battery
should be charged as soon as possible. Once the
“LO bAT”
message is shown the scale
will still operate for about 10 minutes after which it will automatically switch off to protect
the battery.