25
|
P a g e
© Adam Equipment Company 2011
[Print/M+/Esc] again, the scale will exit the User Parameter section
and return to weighing.
Parameter
Description
Options
Default
setting
P1 PCt
This parameter allows the
user to enter the Percent
weighing Function. See
Section 6.7.
None
Enabled
always
P2 AnL
Enter the Animal Weighing
mode of operation, See
section 6.8
Set the filter value.
Enabled
Always
7.3
RS-232
PARAMETERS
•
Press [Z/T] to enter a parameter. Use the [Unit/
] key and [Pcs/ ]
key to set the values or just the [Pcs/ ] key to select the options.
•
Press [Z/T] to confirm the change and then advance to the next
parameter by pressing the [Pcs/ ] key.
•
Press [Print/M+/Esc] to return to [Pcs/ ] the group “
FUnC 3
”. If you
press [Print/M+/Esc] again, the scale will exit the User Parameter
section and return to weighing.
This group of parameters can be set by the user for setting the RS-232 active
or not, baud rate, printing mode, accumulation mode, RS-232 language, and
user or scale ID numbers.
Parameter
Description
Options
Default Values
or setting
C1 on
Enable or disable
the RS-232 interface
Prt on
Prt oFF
Prt on
C2 bd
Baud Rate
600
1200
2400
4800
9600
19200
9600
C3 PrM
Printing
Mode-
Manual, Continuous
or Automatic
mAn,
Cont
(
not on EC
approved scales)
AUto
mAn
C4 Aon
Enable or disable AC on
AC on
