Bumper x 4
Keep your Trellis M4 from going barefoot, give it little
rubber feet! These small sticky bumpers are our favorite
accessory for any electronic kit or device. They are
sticky, but not impossible to remove.
Bumpers may vary in style depending on our supplier
but all are approx 8mm diameter and 4mm tall.
10K Potentiometer
These are our favorite trim pots, perfect for
breadboarding and prototyping. They have a long
grippy adjustment knob and with 0.1" spacing, they plug
into breadboards or female jumper cables with ease.
10K Resistor x 2
Ω
MG! You're not going to be able to resist these handy
resistors! Well, axially, they do all of the resisting for you!
This is a 2 pack of 10K
Ω
Resistors. More specifically,
they are carbon film, through-hole axial type, with 1/4
Watt max dissipation, 300V max voltage, 5% precision
resistors. Whew! These are super common and great for
use in any kit, breadboard, perf-board, or other project.
We got ones with 0.4mm thick wires so they plug in
nicely into solder-less breadboards.
© Adafruit Industries
https://learn.adafruit.com/adabox010
Page 20 of 40
