Wire Stand
This handy bent-wire display stand was originally
designed to hold up 7" tablets but the rubberized design
is great for general purpose electronics & TFT holding.
It's perfect for holding your NeoTrellis M4!
You can adjust the angle and collapse it for travel.
JST 4PH to Plug Header Cable
This cable will let you turn a JST PH 4-pin cable port into
4 individual wires with high-quality 0.1" male header
plugs on the end.
We're carrying these to match up with any of our boards
with STEMMA connectors on the NeoTrellis M4.
Can
also be used with any STEMMA
breakouts
(https://adafru.it/D81)
! This one has header
pins, so it can be used to connect to socket header or
breadboards.
The wires are even color coded:
© Adafruit Industries
https://learn.adafruit.com/adabox010
Page 13 of 40
