Ada GroundDrill-12, Operating Manual

Page: 6 / 34

MEASUREMENT FOUNDATION
Ground Drill - 12 Drill - 12
6
4. Speciications
Engine type 4 stroke, air-cooled
Air-fuel mixture unleaded gasoline with a minimum of 92 octane
Displacement 159 cc
Ignition TCI
Power 5.5 HP / 3600 rpm
Carburetor Diaphragmtype
Fuel tank capacity 1,0 L
Oil capacity in the engine 0,6 L
Max rotational moment 7,5 Nm / 2800 rpm
Weight 23,5 kg
5. Preparation before operation
Set handles on the frame of the auger: handle with throttle lever arm should be at the left of the fuel tank. Screw bolts into the holes
of the handles and frame and tighten. Tighten with the help of the instrument that comes with the equipment.
CHOKER CABLE CONNECTION
Connect cable of the choker to the control lever.
WIRING LEADS
Connect leads (x2) between engine and button of turning off the ignition. Make sure colors match and connections are securely tight.
CONNECTION OF THE AUGER TO THE REDUCTION GEAR
Match power shaft of the reduction gear and drill shank. Place power shaft into the shank. Fix the connection with the bolt.