Also if you press speed bu�on (№9 pic.2), the scanning mode will be
switched off. If you press bu�on (№5 pic.2), scanning mode will be
switched on in the previous selected variant.
OPERATION FROM THE REMOTE CONTROL
1. Press bu�on (№1 pic.3) to switch on the scanning mode. Indicator
and 0º will light up. First variant of the scanning 0° will be switched
on - laser dot.
2. Press bu�on (№1 pic.3) to select the following scanning variant:
10°-45°- 90°-180°. Scanning angle will be displayed with numbers on the
display of the remote.
3. The scan mark can be moved around the perimeter. Movement is
possible only clockwise (one direc�on) when opera�ng from the remote
control. To move clockwise press and hold bu�on (№8 pic.3).
Indicator will light up on the display of the remote control.
4. If to choose scan variant 180º, then further pressing bu�on will switch
off the scan mode. Scan mode indicator will light off. Scan mode will
be switched on if speed bu�on (№3 pic.3) will be pressed.
ROTATION SPEED CHANGE
The laser beam is more visible when the rota�ng speed is slow. The default
speed is 600 rpm.
OPERATION FROM THE TOOL KEYPAD
1. Press bu�on (№9 pic.2) to choose the rota�on speed. Indicator (№10
pic.2) will light up. First variant of the speed will be switched on:
0 rpm - laser dot.
2. Press bu�on (№9 pic.2) to choose next variant of the rota�on speed:
120-300-600 rpm.
3. Indicator (№10 pic.2) will light off when choosing 600 rpm.
OPERATION FROM THE REMOTE CONTROL
1. Press bu�on (№3 pic.3) to choose the rota�on speed. First variant of
the speed will be switched on: 0 rpm - laser dot. “0” will be shown on
the display of the remote control.
2. Press bu�on (№3 pic.3) to select the next variant of the rota�on speed:
120-300-600 rpm. Digits on the display of the remote control will
correspond to the specific rota�on speed.
20
Summary of Contents for ROTARY 500 HV-G SERVO
Page 2: ...2...
Page 36: ...ADA INSTRUMENTS...
