MEASUREMENT FOUNDATION
ProDigit
30
28
Safety instructions
A WARNING: BE SURE to read and understand all instructions in this manual before using this level. Failure to follow all instructions
may result in hazardous radiation exposure, electric shock, ire and/or serious personal injury.
SAFETY PRECAUTIONS FOR LASERS
AWARNING: Use of controls, adjustments or performance of procedures other than those speciied in this manual may result in hazardous
radiation exposure. AWARNING: The use of optical instruments such as, but not limited to, telescopes or transits to view the laser beam
will increase eye hazard.
This level has a built-in laser light. The laser is a Class2 and emits output power of a maximum 1 mW and 635-665 nm wavelengths. These
lasers do not normally present an optical hazard. However, DO NOT stare at the beam as this can cause lash blindness. A CAUTION: The
following label is on your tool. It indicates level emits the laser light.
BE AWARE of the laser light location. ALWAYS MAKE SURE that any bystanders in the vicinity aware of the dangers of looking directly
into the laser. ДWARNING: LASER RADIATION. DO NOT stare into beam. Class2 laser product.
Only turn laser beam on when the level is on the work surface.
DO NOT remove or deface any product labels. Removing product labels increases the risk of exposure to laser radiation.
DO NOT stare directly at the laser beam or project the laser beam directly into the eyes of others. Serious eye injury could result.
DO NOT place the Laser level in a position that �ay cause anyone to stare into the laser bea� intentionally or uninten
-
tionally. Serious eye injury could result.
DO NOT use any �agnifying optical tools such as, but not li�ited to, telescopes or transits to view the laser bea�. Seri
-
ous eye injury could result.
DO NOT operate the Laser level around children or allow children to operate the tool. Serious eye injury could result.
ALWAYS turn the Laser level off when not in use. Leaving the tool on increases the risk of so�eone inadvertently staring
into the laser bea�.
DO NOT operate the Laser Level in co�bustible areas such as in the presence of la��able liquids, gasses or dust.
DO NOT use on surfaces such as sheet steel that have a shiny, relective surface. The shiny surface could relect the
bea� back at the operator. Be aware that laser light relected off a �irror or any other relective surfaces can also be
dangerous.
DO NOT place the Laser level in a position that �ay cause anyone to stare into the laser bea� intentionally or uninten
-
1.
2.
3.
4.
5.
6.
7.
8.
9.
