- 3 -
Input Value Limit
Function
Maximum Input and Time
1. Product Introduction
Wattman (HPM-100A)isaconsumption/standby power analyzer and a practical and economical handheld-type wattmeter. It
enables the measurement of the power consumption of home appliances and business equipment with not greater than a
9mW~3.75kW power consumption, in a Plug & Play way, thus allowing easy and simple operation by any user. It also
enables the easy conversion of electric power usage data into electric charge and amount of CO2 emission values.
⊙
Characteristics
- It displays the voltage, current, power, and frequency at the same time. It can also display the power factor,
electric energy, electric charge, and amount of CO2 emission based on the amount of electric energy used.
- There is no need for batteries and adaptors as no additional power operation is needed.
- Superior precision, with a base error range of ±0.4%.
- Equipped with universal and convenient multiplug sockets.
- Its front buttons enable the selection of the unit to be used for the electric charge and the amount of CO2 emission.
- Equipped with a time setting function (00.hr: unlimited; 1~24 hr).
- Comes with a free copy of the GUI PC program.
- With free portable bags.
- Cable supply for data communication use (with charge).
Warning
- Extreme caution against high voltage should be taken whenusingthisproduct.
- The inappropriate use of this product may cause casualties or electric shock.
- Observe all the safety guidelines stated in the accompanying manual.
- Do not repair your own unit unless you have the necessary skills.
⊙
Safety Instructions
This equipment was designed in accordance with the CE CAT II & FCC safety standards. The users, however, must
have a thorough knowledge of the following guidelines and must use the product with full attention to ensure safe
operation.
- Do not attempt to operate the product if you cannot close its back cover.
