8
DISPLAy FRAME UNIT
TM
installation of Power adapters
The device may only be operated with the provided power adapter. The rated voltage is indicated on the product
label. The device is factory-set to the optimal operating voltage (see Technical Specifi cation). Use only power cords
and plugs that are suitable for your local electrical outlets. Install the power cords in such a way that it does not
obstruct anyone. Ensure furthermore that the cable is not clamped and that it cannot be pulled out accidentally from
the power adapter. Do not install the power cords in the proximity of heating elements and never place heavy items
on the cable or power adapter. Do not modify or arbitrary repair the power cords.
CaUtion
Do not use any power cords or adapters other than those provided with this product! Use of power cords or
adapters other than those provided with this product may cause fi re, electric shock or malfunction. If several kinds
of power cords are provided with this product, use the one that fi ts your power socket. Do not let the adapter hang
down while using. Do not cover or wrap the adapter. Leave space around the adapter to prevent overheating. The
individual components can be destroyed, if the polarity is reversed or an incorrect connection is used.
A goodwill replacement is not possible in such cases, since each device is submitted to meticulous quality
inspections prior to shipping. The connecting plugs must be attached in such a way that the connector is held fi rmly.
Have trained technical personnel install the electrical facilities necessary for mounting. The power adapter has to be
installed in ventilated areas due to the heat emission! Connect the power cord to a grounding outlet! Never cut or
damage the power cord!
Please disconnect the device from the power adapter in the following cases:
• The device is out of use for a lengthy period.
• The device malfunctions or displays other unusual features, necessitating maintenance work.
• During a thunderstorm.
Please plan the positioning of the power adapter and the source cables before proceeding with the structural
measures and positioning of the monitor system. Observe the protection zones when placing the power adapter!
For in-wall applications please bear in mind that the power adapter has to be placed beyond the inset due to heat
emission!
