7.2
BOILER ROOM
• Keep vents free at all times.
• Do not store inflammable products in the boiler room.
• Take care not to store corrosive products near the boiler, such
as paints, solvents, chlorine, salt, soap and other cleaning
products.
• If you smell gas, do not switch on the light or light a flame. Turn
off the mains gas tap at the meter and inform the appropriate
services immediately.
7
USER GUIDE
7.1.5
GAS BURNER - RESETTING
If the atmospheric burner is not working:
1.
Remove the protective cover.
2.
Press the red button to start the burner.
3.
If the burner lights, replace the cover.
If the burner is not working, isolate the electricity
supply before attempting to reset the safety thermostat.
4.
Remove the front panel of the casing and reset the safety
thermostat positioned on top of the boiler.
Wait until the boiler temperature is below 60 °C. Then
replace the casing front panel.
5.
If the burner lights, replace the cover.
6.
If the fault persists, notify the installing engineer.
Starting the burner.
In normal operation, the gas burner starts automatically whenever the
boiler temperature falls below the set temperature.
Fig. 23: Safety thermostat reset button
To ensure your system operates properly, have it
professionally serviced once a year before the central
heating season begins.
Fig. 22: Burner reset button
13
