OPERATION
Using the Alarm Clock
Set the Alarm Time
To set alarm time, press the “ALARM SET” button once to review alarm time.
Press the “ALARM SET” button again to enter ALARM SET MODE.
To adjust the currently selected (flashing) item, press and release the “+” or
“–“ buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “ALARM SET“ button to adjust
the next preference. The preference set order is as follows:
ALARM CLOCK HOUR
(Please note PM Indicator light)
ALARM CLOCK MINUTE
You will automatically exit ALARM SET MODE if no buttons are pressed
for 30 seconds. Enter ALARM SET MODE at any time by pressing the
“ALARM SET“ button twice.
Alarm Clock ON or OFF function
To Turn Alarm on: Press the “ALARM ON/OFF” button until the
ALARM ON icon appears on the screen.
To Turn Alarm off: Press the “ALARM ON/OFF” button until the
ALARM ON icon disappears from the screen.
Alarm Clock SNOOZE function
When the alarm is sounding, activate the 9 minute SNOOZE function by
pressing the SNOOZE button on the top of the alarm clock. SNOOZE
function remains active until ALARM ON/OFF button is pressed.
Troubleshooting
Clock is too dark,
hard to read or
doesn’t work
• Reset the unit by pressing the reset button located on
the bottom of the clock. This will reset the alarm to the
original factory settings. Time and date will need to be
entered after a reset.
If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.AcuRite.com or call
(877) 221-1252 for assistance.
5
