SETUP
Clock Setup
Plug the power cord into power outlet.
Intelli-Time
®
Clock
Intelli-Time clock and calendar are pre-programmed to the correct time and
date, and update automatically for Daylight Savings Time. All you need to do
is select your time zone using the “TIME ZONE” switch.
Set the Time & Date
Choose the correct time zone (HAST AKST PST MST CST EST AST) using the
“TIME ZONE” switch on the bottom of the clock.
Choose Daylight Savings Time ON or OFF using the DST switch on the bottom
of the clock. If you live in an area that observes Daylight Savings Time, DST
should be set to ON, even if it is not currently Daylight Savings Time.
Press and hold the “TIME SET” button for 3 seconds to enter the SET MODE.
Once in the SET MODE the preference you are currently in will blink on the clock.
To save your adjustments, press and release the “TIME SET” button to adjust
the next preference. The preference order is as follows:
CLOCK HOUR
(Please note PM Indicator light)
CLOCK MINUTE
CALENDAR YEAR
CALENDAR MONTH
CALENDAR DATE
You will automatically exit SET MODE if no buttons are pressed
for 30 seconds. Enter SET MODE any time by pressing and holding
“TIME SET” button for 3 seconds.
Dimmer HI/LO
Optimize the display brightness for the location with the HI/LO Dimmer switch
located on the back of the clock.
Volume HI/LO
Optimize the alarm volume for the location with the Volume HI/LO switch
located on the back of the clock.
4
