AcuRite 01202 Instruction Manual Download Page 10

10

Placement for Maximum Accuracy

AcuRite sensors are sensitive to surrounding environmental conditions. Proper 

placement of both the display and outdoor sensor are critical to the accuracy 

and performance of this product.

Display Placement

Place the display in a dry area free of dirt and dust. Display 

stands upright for tabletop use and is wall-mountable.

Outdoor Sensor Placement

Sensor must be placed outside to observe outdoor conditions. 

Sensor is water resistant and is designed for general outdoor 

use, however, to extend its life place the sensor in an area 

protected from direct weather elements.
Hang the sensor using the integrated hang hole or hanger, 

or by using string (not included) to hang it from a suitable 

location, like a well covered tree branch. The best location is 

4 to 8 feet (1 to 2 metres) above the ground with permanent 

shade and plenty of fresh air to circulate around the sensor. 

Important Placement Guidelines

• To ensure accurate temperature measurement, place units out of direct 

sunlight and away from any heat sources or vents. 

• Display and outdoor sensor must be within 330 ft (100 m) of each other. 
• To maximize wireless range, place units away from large metallic items, thick 

walls, metal surfaces, or other objects that may limit wireless communication.

• To prevent wireless interference, place both units at least 3 ft (90 cm) away 

from electronic devices (TV, computer, microwave, radio, etc.).

(100 metres maximum)

(330 feet) 

3 feet

(90 cm)

Setup is Complete

The sensor will now synchronize with the display. It may take a few minutes for 

synchronization to complete. Please refer to the troubleshooting section of this 

manual if anything appears to be functioning improperly.

Summary of Contents for 01202

















Reviews: