7
Placement for Maximum Accuracy
AcuRite sensors are sensitive to surrounding environmental conditions. Proper
placement of both the display and wireless sensor are critical to the accuracy
and performance of this product.
Display Placement
Place the display in a dry area free of dirt and dust. Display
stands upright for tabletop use or is wall-mountable.
Wireless Sensor Placement
Sensor is water resistant and is designed for indoor or outdoor
use, however, to extend its life place the sensor in an area
protected from direct weather elements. The sensor may also be
placed indoors to measure environmental conditions.
Hang the sensor using the integrated hang holes or hanger, or
by using string (not included) to hang it from a suitable location,
like a well covered tree branch. The best location is 4 to 8 feet
above the ground with permanent shade and plenty of fresh air
to circulate around the sensor.
Important Placement Guidelines
• To ensure accurate temperature measurement, place units out of direct
sunlight and away from heat sources or vents.
• Display and wireless sensor must be within 330 ft (100 m) of each other.
• To maximize wireless range, place units away from large metallic items, thick
walls, metal surfaces, or other objects that may limit wireless communication.
• To prevent wireless interference, place both units at least 3 ft (.9 m) away
from electronic devices (TV, computer, microwave, radio, etc.)
Setup is Complete
The sensor(s) will now synchronize with the display. It may take a few minutes
for synchronization to complete. Please refer to the troubleshooting section of
this manual if anything appears to be functioning improperly.
pm
(100 meters)
(330 feet maximum)
sensor
