AcuRite 00484 Instruction Manual Download Page 11

11

Outdoor 

 temperature

is flashing or   

showing dashes

Flashing of the outdoor temperature is generally an 

indication of wireless interference.
1. Bring both the sensor and display indoors, side by side    

    and remove power adapter/batteries from each.
2. Reinstall batteries in the outdoor sensor.
3. Reinstall power adapter/batteries in display.
4. Let the units sit within a couple feet of each other 

    for a few minutes to gain a strong connection.

Inaccurate forecast

•  Weather Forecast icon predicts conditions for the next  

12 to 24 hours, not current conditions.

•  Has Learning Mode icon disappeared from the display? 

Learning Mode must complete before forecast and 

pressure will be accurate.

•  Allow unit to run continuously for 33 days. Battery 

removal or resetting the display will restart Learning 

Mode. After 14 days, forecast should be fairly accurate, 

however Learning Mode calibrates for a total of 33 days.

Inaccurate

temperature  

or humidity

•  

Make sure both the display and sensor are placed out of 

direct sunlight and away from any heat sources or vents 

(see page 8).

•  Make sure the display is positioned away from moisture 

sources (see page 8). 

Troubleshooting

Problem

Possible Solution

No outdoor sensor

reception

no bars

If the wireless signal indicator shows no bars:
•  Relocate the display and/or the outdoor sensor.  

The units must be within 165 ft (50 m) of each other.

•  Make sure both units are placed at least 3 feet  

(.9 m) away from electronics that may interfere with 

the wireless communication (such as TVs, microwaves, 

computers, etc).  

•  Use standard alkaline batteries (or lithium batteries in 

sensor when temperature is below -4ºF/-20ºC). Do not 

use heavy duty or rechargeable batteries. NOTE: It may 

take a few minutes for display and sensor to synchronize 

after batteries are replaced. 

Display screen

not working

• Check that the power adapter is plugged into the display 

and an electrical outlet.

If your AcuRite product does not operate properly after trying 

the troubleshooting steps, visit www.AcuRite.com or call  

(877) 221-1252 for assistance.

Summary of Contents for 00484

















Reviews: