background image

 

 

CLIENT INFORMATION: 

The information in this bulletin is intended for use only by skilled technicians who have the proper tools, equipment, 

and training to correctly and safely maintain your vehicle. These procedures should not be attempted by “do-it-yourselfers,” and you should not 
assume this bulletin applies to your vehicle, or that your vehicle has the condition described. To determine whether this information applies, 
contact an authorized Acura automobile dealer. 

 

© 2018 American Honda Motor Co., Inc. – All Rights Reserved  

Page 

1

 of 

13

 

 

Service Bulletin 

17-043

February 8, 2018 

08212 Version 2

 

2018 RLX: TQI and New Model Service Information 

Supersedes 17-043, dated November 2, 2017, to revise the information highlighted in yellow. 

AFFECTED VEHICLES 

Year Model 

Trim 

Level 

2018 

RLX 

With Technology Package 

REVISION SUMMARY 

In NEW MODEL SERVICE INFORMATION, we added 2 topics: 3. Shift by Wire and 4. Shift Override. 

INTRODUCTION 

This bulletin covers the total quality inspection (TQI) of the 2018 RLX. It includes these procedures: 

1. 

Remove the Exterior Protective Coatings 

10. 

Initialize the TPMS 

2. 

Install the Fuses 

11. 

Do the PCM Idle Learn Procedure 

3. 

Remove the Interior Protective Coverings 

12. 

Install the SBW Shifter Cover 

4. 

Install the Floor Mats 

13. 

Check/Refresh the SiriusXM

®

 Radio Dealer Demo 

Service (Except in Alaska and Hawaii)   

5. 

Check the Battery 

14. 

Check the ACC, LKAS, Forward Collision 
Warning/Collision Mitigation Braking System

,  

Lane Departure Warning/Road Departure 
Mitigation Indicators 

6. 

Install the Body Plugs 

15. 

Check the Head-Up Warning (HUW) Indicator 

7. 

Install the Front License Plate Holder 

16. 

Check Voice System Interaction 

8. 

Clean the Rear License Plate Area, and 
Install the Mounting Hardware 

17. Check 

Bluetooth

®

 HandsFreeLink

®

 (HFL) 

9. 

Set the Tire Pressures 

 

 

To do a TQI on the navigation system, be sure to complete S/B 17-044, 

2018 RLX: TQI of the Navigation System

This bulletin also includes this new model service information: 

1. 

10-Speed Automatic Transmission 

3. 

Shift by Wire (SBW) 

2. 

Traffic Jam Assist (TJA) 

4. Shift 

Override 

Summary of Contents for RLX 2018














Reviews: