684
uu
Fuses
u
Inspecting and Changing Fuses
Han
d
lin
g the U
n
expected
Inspecting and Changing Fuses
1.
Set the power mode to VEHICLE OFF. Turn
headlights and all accessories off.
2.
Remove the fuse box cover.
3.
Check the large fuse in the engine
compartment.
u
If the fuse is blown, use a Phillips-head
screwdriver to remove the screw and
replace it with a new one.
4.
Inspect the small fuses in the engine
compartment and the vehicle interior.
u
If there is a blown fuse, remove it with
the fuse puller and replace it with a new
one.
1
NOTICE
Replacing a fuse with one that has a higher rating
greatly increases the chances of damaging the
electrical system.
Use the charts to locate the fuse in question and
confirm the specified amperage on the fuse label.
2
Replace a fuse with a spare fuse of the same specified
amperage.
There is a fuse puller on the back of the cover of the
engine compartment fuse box type A.
Combined
Fuse
Blown Fuse
Fuse Puller
23 ACURA RDX-31TJB6400.book 684 ページ 2022年8月4日 木曜日 午後1時51分
Summary of Contents for RDX 2023
Page 1: ...2023 RDX Owner s Manual ...