Continued
453
uu
When Driving
u
Shifting
Driving
■
Shift Operation
1
NOTICE
When you change
(
D
to
(
R
and vice versa, depress
the brake pedal to come to a complete stop, then
select the intended gear position while maintaining
brake pressure.
When changing the gear position to
(
P
, always keep
your foot on the brake pedal until you have
confirmed that
(
P
is shown on the gear position
indicator.
Use the gear position indicator and the shift button
indicator to check the gear position before selecting
a shift button.
If the indicator of the currently selected gear position,
or all the gear position indicators are blinking
simultaneously, there is a problem with the
transmission.
Avoid sudden acceleration and have the transmission
checked by a dealer as soon as possible.
The fuel supply may be cut off if you drive at engine
speeds in or over the tachometer red zone (engine
speed limit). If this happens, you may experience a
slight jolt.
When the engine speed is increased while the
transmission is in
(
N
,
(
P
or
(
R
, the fuel supply may
be cut off even without the engine speed entering
the tachometer red zone.
Gear Position Indicator
Tachometer red zone
Press the
(
P
button.
Pull back the
(
R
button.
Press the
(
N
button.
Shift Button
Indicator
M
(sequential mode)
Indicator
Sequential Mode Gear
Selection Indicator
Press the
button.
Each time you press the button,
the mode switches between
Drive and S Position mode.
D/S
23 ACURA RDX-31TJB6400.book 453 ページ 2022年8月4日 木曜日 午後1時51分
Summary of Contents for RDX 2023
Page 1: ...2023 RDX Owner s Manual ...