uu
When Driving
u
Starting the Engine
446
Driving
■
To stop the engine
Press and hold the
button
for one second.
Go within the range,
and try again.
Amber LED: Blinks when any
button is pressed.
Red LED:
●
Comes on for one second to let you
know that the engine has stopped.
●
Blinks when the remote is out of
the keyless access system range.
The engine will not stop.
1
The engine may not start by the remote engine start
if:
•
You have disabled a remote engine start setting
using the audio/information screen.
2
P. 359
•
The power mode is not in VEHICLE OFF.
•
The transmission is in a position other than
(
P
.
•
The hood is open, or any door or the tailgate is
unlocked.
•
The 12-volt battery temp is too low or the 12-volt
battery charge is too low.
•
You have already used the remote twice to start
the engine.
•
Another registered keyless remote is in the vehicle.
•
There is any antenna failure.
•
The door is unlocked with the built-in key.
•
The engine oil pressure is low.
•
The engine coolant temperature is extremely high.
•
The telematics unit malfunctions.
•
The security system alarm is not set.
Before starting the engine, make sure to check the
door lock status using the remote. When you press
the
button, wait for the green LED to blink. If
the red LED turns on, the doors and tailgate did not
lock, and the engine does not start.
* Not available on all models
23 ACURA RDX-31TJB6400.book 446 ページ ２０２２年８月４日 木曜日 午後１時５１分
Summary of Contents for RDX 2023
Page 1: ...2023 RDX Owner s Manual ...
