BEST METHOD for High-Voltage Shutdown
Push and hold the POWER button for 2 seconds.
This simple action turns off the gasoline engine and immediately shuts down the high-voltage system
controllers, thereby preventing current flow into the cables. It also cuts power to the airbags and the seat
belt tensioners, though these pyrotechnic devices have up to a 3-minute deactivation time.
To prevent accidental restarting, you must remove the keyless remote from the vehicle and move it at least 20 feet
away.
If you cannot locate the keyless remote, you should also do the SECOND-BEST METHOD for high-voltage shutdown
(for preventing high-voltage current flow) on the following page.
HIGH-VOLTAGE SHUTDOWN PROCEDURE
Preventing Current Flow Through High-Voltage Cables
Before attempting to rescue occupants or move a damaged Acura MDX Sport Hybrid, you should reduce the potential
for current to flow from the electric motor or the high-voltage battery through the high-voltage cables.
There are
two recommended methods
for preventing current flow. These are discussed on the following pages.
Push and Hold = 2 Sec.
Page
16
of
21
Component Locations
Emergency Procedures
Sport Hybrid
