Acura Integra Sedan 2000 Owner'S Manual Download Page 170

Page: 170 / 273

Engine Oil

Adding Oil

To add oil, unscrew and remove the

engine oil fill cap on top of the valve
cover. Pour in the oil, and install the
engine oil fill cap. Tighten it securely.

Wait a few minutes and recheck the

oil level. Do not fill above the upper
mark; you could damage the engine.

Recommended Oil

Oil is a major contributor to your
engine's performance and longevity.

Always use a premium-grade deter-
gent oil. It is highly recommended
that you use Genuine Honda Motor

Oil in your vehicle for as long as you
own it.

You can determine an oil's SAE
viscosity and Service Classification
from the API Service label on the oil

container.

CONTINUED

Maintenance

ENGINE OIL FILL CAP

Summary of Contents for Integra Sedan 2000


















































































































































































































































































Search results

Summary of Contents for Integra Sedan 2000

Reviews:

Related manuals for Integra Sedan 2000

Brands by name

Popular brands

Acura Integra Sedan 2000, Owner'S Manual

Search results

Summary of Contents for Integra Sedan 2000

Reviews:

Related manuals for Integra Sedan 2000

Brands by name

Popular brands