152 |
| 153
DRIVING
DRIVING
If driving at high speeds (over 168mph/270km/h),
adjust cold tire pressure as shown below to avoid
excess heat buildup and sudden tire failure.
DRIVING SPEED
TIRE
COLD TIRE PRESSURE
OVER
168 mph/ 270 km/h
FRONT
REAR
260 KPA, 38 PSI
260 KPA, 38 PSI
WARNING
If driving at high speeds (over 168mph/270km/h),
adjust cold tire pressure as shown below to avoid
excess heat buildup and sudden tire failure.
Pour conduire à grande vitesse (plus de 168 mph /
270 km/h) ajuster la pression des pneus à froid, comme
indiqué ci-dessous, afin d’éviter l’accumulation excessive
de chaleur et une défaillance soudaine du pneu.
DRIVING SPEED
VITESSE DE CONDUITE
COLD TIRE PRESSURE
PRESSION DES PNEUS À FROID
TIRE/ PNEU
FRONT/AVANT
REAR/ARRIÈRE
260 KPA, 38 PSI
260 KPA, 38 PSI
OVER/ PLUS DE
168 mph/ 270 km/h
WARNING
ATTENTION
U.S. models
Canadian models
Doorjamb
2D
AAAA
Use of slick tires/racing slicks may subject the chassis and body components to
higher dynamic loads than they were designed for.
Higher than intended dynamic loads could result in component failure, loss of
control, and serious injury or death to you or others.
Do not install slick tires on the NSX.
WARNING
• Inspect all exhaust mounts for cracks or signs of wear.
• Inspect tailpipe active exhaust valves to ensure they are functioning correctly. You can do
this by cycling the IDS switch between SPORT and TRACK modes, while the engine is idling.
n
While Driving
• You may see a brake warning message in the Driver
Information Interface (and warning message chime) and/
or experience increased brake pedal stroke. If either occurs,
immediately slow down and allow for increased stopping
distances. The message will disappear once the brakes have
cooled and the system has returned to normal operating
condition.
• After high-performance driving, it is critical to allow your vehicle to properly cool down. Do
not immediately stop your vehicle. Instead, continue driving at reduced speeds, allowing
for increased braking distances until your vehicle returns to normal operating temperatures.
Once you stop and safely park the NSX, open the hatch to aid cooling. If the engine
oil temperature reaches the H mark during high-performance driving, have your NSX
inspected by an authorized Acura NSX dealer.
n
AFTER DRIVING
Check your NSX, and each of its relevant components, to make sure that it still is in a safe
operating condition (example: wheel lug bolt torque, tire pressure, etc.). We recommend you
repeat the
Before Driving
protocol. If any item shows excessive wear or appears to be in an
unusual condition, have it replaced, or exercise appropriate caution when driving and see
your authorized Acura NSX dealer.
For more information, please contact your authorized Acura NSX dealer, and/or Acura Client
Relations (see page 212).