Acura 2012 RL, Owner'S Manual

Page: 263 / 562

＊
＊
CONTINUED
This audio system can operate the
audio files from a USB flash memory
device with the same controls used
for the in-dash disc changer. To play
a USB flash memory device, connect
it to the USB adapter cable in the
console compartment, then press the
DISC/AUX button. The ignition
switch must be in the ACCESSORY
(I) or ON (II) position.
The audio system reads and plays
the audio files on the USB flash
memory device in MP3, WMA or
AAC formats. Depending on the
format, the display shows MP3,
WMA or AAC when a USB flash
memory device is playing.
The recommended USB flash
memory devices are 256 MB or
higher, and formatted with the FAT
file system. Some digital audio
players may be compatible as well.
Do not use a device such as a card
reader or hard drive as the device
or your files may be damaged.
Do not connect your USB flash
memory device using a hub.
Do not use an extension cable to
the USB adapter cable equipped
with your vehicle.
Do not keep a USB flash memory
device in the vehicle. Direct
sunlight and high heat will damage
it.
We recommend backing up your
data before playing a USB flash
memory device.
Depending on the type and
number of files, it may take some
time before they begin to play.
Some USB flash memory devices
(such as devices with security lock-
out features, etc.) will not work in
this audio unit.
Only AAC format files recorded
with iTunes are playable on this
audio unit. :
Audio System
To Play a USB Flash Memory
Device
Fe
a
tu
re
s
257
NOTE:
11/07/24 10:19:39 31SJA670_262