Navigation System
61
Driving to Your Destination
On the
map
screen, you can display
freeway exit information using the
Interface Dial
. The exit info icon will
only be displayed on the
map
screen if
there is any freeway exit information
available. Choose the 1/4, 1/2, or 1 mile
scale, then move the crosshairs to the
desired exit info icon and push in on the
Interface Dial
. Choose a place from
the list and set it as a new destination or
waypoint.
NOTE:
To turn on “Freeway exit information”
on the
map
screen, display the icon bar
and select the
icon (see page
68
).
Guidance Mode
When en route to a destination, you
have two display options: single-screen
mode (the factory default) and the split-
screen mode.
Single-screen mode
- A map is
displayed with occasional guidance
pop-up windows as you approach a
maneuver.
Split-screen mode
- The map is always
displayed on the left of the screen, and
the maneuver or direction list is
displayed on the right-hand side of the
screen.
Guidance mode can be changed in either
SETUP (see
Guidance Mode
on
page
109
), or by accessing the icon bar
(see
CHANGE GUIDANCE MODE
on
page
68
).
When you get near the maneuver, the
map
screen changes to:
On the
map
screen, the location of the
maneuver is marked with a small yellow
square. The guidance window is simply
an enlargement of the area indicated by
the yellow square. After you complete
the maneuver, the display returns to a
full
map
screen when the single-screen
mode is set, or to a map and direction
list screen when the split-screen mode is
set.
2010 RL
