46
Navigation System
Showing the Map of City
With the
City
selection, the display
changes to the
Enter city name
screen.
When you have entered the desired city,
the display changes to a map. The
starting location will be the central
position in the selected city.
See
Showing the Map of Current
Position
on page
45
for instructions on
finding and entering your desired
destination.
Showing the Map of State
With the
State
selection, the display
changes to the
Select a state
screen.
After you select the desired state, the
display changes to a map of the state,
with the cross hairs located near the
middle.
Use the
Interface Dial
to move the
cross hairs to the area of the state close
to your intended destination. If desired,
rotate the
Interface Dial knob
to
change the map scale. When you have
the cross hairs in the desired area, push
in on the
Interface Dial
. The map scale
changes to a closer view.
Move the cross hairs to the desired
destination, then push in on the
Interface Dial
. The address of the
location you have selected will appear at
the top of the screen.
The yellow box indicates the area you
will see when you click on the current
map with the
Interface Dial
.
NOTE:
The address of the location will be
displayed on the 1/20, 1/8, 1/4, or 1/2
mile (80, 200, 400, or 800 meter) scale
map.
If this is the desired address, push in on
the
Interface Dial
again. If not, use the
Interface Dial
to reposition the cross
hairs, then push in on the
Interface
Dial
again to display the new address.
Once you select an address, the system
then displays the
Calculate route to
screen (see
Driving to Your Destination
on page
50
).
Entering a Destination
2008 RL