132
Navigation System
Frequently Asked Questions
Map, and Features, Voice Operation, Entering Addresses
Problem
Solution
Why does the
Disclaimer
screen need to be displayed every
time I start the car? I am the only driver.
The
Disclaimer
screen reminds you and your guest drivers to always
operate the navigation system in a safe manner.
The
Setup
or
Information
screen has “grayed out” items that
I cannot select. Why?
You need to select
OK
on the
Disclaimer
screen to view these items. See
System Function Diagram
on page
26
.
I tried entering an address, but the city or street could not be
found. Is there any other way to route to the location?
Some cities are lumped in with a major metro area Try entering the street
first. In rural “unverified” areas or new subdivisions, streets may be
missing, or only partially numbered. Try selecting the destination directly
from the map. See
By Map Input
on page
45
.
When I enter an address, some letters become grayed out. Is
this normal?
Yes, as you enter each letter in an address or a point of interest (POI), the
system looks in the database to see what letters are possible and “grays out”
letters that do not apply.
How do I delete Personal Address, Previous Destinations, or
the Home Address?
This is done in Setup, under “Personal Information.” See page
85
.
I cannot hear the navigation system voice.
1) Ensure that
Volume
in the
Setup
screen (first) is not
OFF
. See page
84
.
2) Go to “Basic Settings” in the
Setup
screen (second), and set
Voice
Recognition Feedback
to
ON
. See page
91
.
The voice control system is having difficulty recognizing my
Voice commands.
Ensure that the center and side vents are not blowing on the microphone on
the ceiling, place your hand over the microphone; if you feel any airflow,
adjust the vents. Ensure the vehicle is as quiet as possible, and that you are
using the correct command when speaking (See
Improving Voice
Recognition
on page
14
). Say “Help” at any screen to see a list of the
applicable voice commands.
When the system pronounces the street name in the guidance
command, or reads the destination address it sounds strange.
What causes this?
The basic guidance phrase uses a studio-recorded voice, but the street name
is pronounced by the system using a machine-generated voice.
Consequently, the name may be mispronounced or sound strange at times.
2008 RL