Acura 2006 RL Owner'S Manual Download Page 379

Page: 379 / 454

Determine which of the two bulbs
is burned out: turn signal or back-
up light.

Remove the socket by turning it
one-quarter turn counterclockwise.

Remove the burned out bulb by
pulling it straight out of its socket.

Open the trunk lid, and remove
the left or right maintenance lid.

Remove the mounting nut with an
8 mm wrench.

Carefully pry in the top or bottom
edge of the trim with a small flat-
tipped screwdriver, and pull the
trim straight back.

Remove the two mounting bolts
with an 8 mm wrench.

Pull the taillight assembly straight
back out of the body.

Lights

Replacing Rear Bulbs

378

MOUNTING NUT

MAINTENANCE LID

BOLTS

BULBS

TAIL LIGHT TRIM

Summary of Contents for 2006 RL







































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 RL

Reviews:

Related manuals for 2006 RL

Brands by name

Popular brands

Acura 2006 RL, Owner'S Manual

Search results

Summary of Contents for 2006 RL

Reviews:

Related manuals for 2006 RL

Brands by name

Popular brands