To go back one step in a command
process, say, ‘‘Go back,’’ or press
the Back button.
If nothing is said while the HFL is
listening for a command, the HFL
will time out and stop its voice
recognition. The next time you
press the top of the TALK/BACK
button, the HFL begins listening
from the point at which it timed
out.
When you finish a command
sequence, the HFL goes back to
its main menu. For example, when
you store the name, ‘‘Eric,’’ the
HFL response is, ‘‘Eric has been
stored.’’ The next time you press
the Talk button, you will be at the
main menu.
To end a command sequence at
any time, press and hold the Back
button, or press the Talk button,
wait for the beep, and say, ‘‘Cancel.’’
The next time you press the Talk
button, the HFL begins from its
main menu.
The HFL will accept a numeric, four-
digit passcode that you can use for
security purposes.
With the ignition in the ON (II)
position, press and release the top
of the TALK/BACK button on the
steering wheel. After the beep, say
‘‘Security.’’ The HFL response is
‘‘Security options are lock, unlock,
and set passcode.’’
Press and release the top of the
TALK/BACK button. After the
beep, say the four-digit passcode
you want to use. For example, say
‘‘1, 2, 3, 4.’’ The HFL response is
‘‘1, 2, 3, 4. Is this correct?’’
Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Yes.’’ The HFL
response is ‘‘The new passcode
has been stored. Returning to the
main menu.’’
Once a passcode is set, you can lock
the HFL so it only operates after the
passcode is entered, or you can
unlock it so anyone using your
vehicle can also use the HFL.
The HFL response is ‘‘What is the
new four-digit passcode?’’ (If you
are changing the passcode, you
will first be asked for the current
passcode.)
Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Set passcode.’’
2.
1.
4.
5.
3.
To set your passcode, do this:
Setting Your Passcode
Locking or Unlocking the HFL
HandsFreeLink
164
TM
