Acura 2003 3.2 TL, Owner'S Manual

Page: 53 / 347

If the SRS indicator light does not
come on after you turn the ignition
ON (II).
If the light stays on after the
engine starts.
If the light comes on or flashes on
and off while you drive.
If the light comes on at any other
time, or does not come on at all, you
should have the system checked by
your dealer. For example:
When you turn the ignition ON (II),
this indicator will light briefly then
go out. This tells you that the system
is working properly.
The purpose of the SRS
indicator light is to alert
you to a potential problem with your
front airbags. This light will also
alert you to a potential problem with
your automatic seat belt tensioners
(page
); or your side airbags or
passenger’s side airbag automatic
cutoff system (page
).
If you see any of these indications,
your front or side airbags may not
deploy, your passenger’s side airbag
automatic cutoff system may not
work properly, or your seat belt
tensioners may not work when you
need them. See your Acura dealer as
soon as possible.
49
45
How the SRS Indicator Light
Works
Additional Information About Your Airbags
Driver and Passenger Saf ety
50
Ignoring the SRS indicator light
can result in serious injury or
death if the airbags, cutoff
system, or tensioners do not
work properly.
Have your vehicle checked by a
dealer as soon as possible if
the SRS light alerts you to a
potential problem.
０１／１２／２４ １１：３７：２６ ３１Ｓ０Ｋ６４０ ００５３