Acura 2003 3.2 TL Owner'S Manual Download

Page: 43 / 347

Check that the child’s seat belt is
properly positioned and secured.

Have the child sit up straight, back
against the seat, and feet on or
near the floor.

Move the vehicle seat to the rear-
most position.

Carefully read the owner’s manual
and make sure you understand all
seat belt instructions and all safety
information.

If you decide that a child can safely
ride up front, be sure to:

To safely ride in front, a child must
be able to follow the rules, including
sitting properly and wearing the seat
belt properly throughout a ride.

Physically, a child must be large
enough for the lap/shoulder belt to
properly fit over the hips, chest, and
shoulder (see pages

and

). If

the seat belt does not fit properly,
the child should not sit in the front.

Supervise the child. Even mature
children sometimes need to be
reminded to fasten the seat belts
or sit properly.

Remind the child not to lean
toward the door because of the
side airbag.

Protecting Children

Driver and Passenger Saf ety

Maturity

Physical Size

０１／１２／２４１１：３５：４９３１Ｓ０Ｋ６４０００４３

Summary of Contents for 2003 3.2 TL




























































































































































































































































































































































Search results

Summary of Contents for 2003 3.2 TL

Reviews:

Related manuals for 2003 3.2 TL

Brands by name

Popular brands

Acura 2003 3.2 TL, Owner'S Manual

Search results

Summary of Contents for 2003 3.2 TL

Reviews:

Related manuals for 2003 3.2 TL

Brands by name

Popular brands