Lights
Replacing a Front Turn Signal
and Parking Light Bulbs
1. Use a Phillips-head screwdriver to
loosen the turn signal assembly's
mounting screw.
2. Remove the turn signal assembly
from the bumper. Remove the
electrical connector from the bulb
holder by squeezing the connector
and pulling.
3. Remove the bulb holder from the
turn signal assembly by turning it
counterclockwise.
4. To remove the turn signal bulb,
push it in slightly and turn it
counterclockwise. To remove the
parking light bulb, pull it straight
out of its holder.
5. Install the new bulb in the socket.
6. Push the bulb holder into the turn
signal assembly and turn it
clockwise until it locks.
7. Reconnect the electrical connector
to the bulb holder.
8. Test the lights to make sure the
new bulb is working.
9. Put the turn signal assembly into
the bumper. Install and tighten the
mounting screw.
Maintenance
