© 2019 American Honda Motor Co., Inc. – All Rights Reserved.
BII12560-14 (1907)
5 of 5
11. Plug the harness 2-pin connector into the right light
harness 2-pin connector and plug the vehicle 2-pin
connector into the remaining harness 2-pin
connector. Secure the 2-pin connectors and harness
to the vehicle harness with one wire tie.
VEHICLE 2-PIN
CONNECTOR
HARNESS 2-PIN
CONNECTOR
HARNESS 2-PIN
CONNECTOR
RIGHT LIGHT
HARNESS
2-PIN
CONNECTOR
2-PIN
CONNECTORS
WIRE TIE
HARNESS
VEHICLE
HARNESS
12. Check that all wire harnesses are routed properly
and all connectors are plugged in.
13. Install all removed parts.
14. Connect the negative cable to the battery.
15. Press and hold the audio unit power button for
2 seconds to restore the audio and navi (if equipped)
system functions.
16. Set the clock on vehicle without navigation.
17. If necessary, restore the systems back to normal
operation as described in the service manual if
necessary.
Check the Operation of the Pattern Projectors
18. Make sure the light comes on when you open each
front door.
